TimberSurf’s Model Railway
Modelling Tips, Links & Guides for Model Railways
Linka Brick Windows Leaded
Select a picture to download the pdf of your chosen Windows.
These are the first few for Linka Brick Moulds. This is just a start, of a more expansive range to include:-
Stone moulds with Church Lancet, scratch O gauge scale, leaded lights, stained glass and defined size scratch, but I will take any comments/requests if you think they need correction or you have a particular need for a variety not shown.
I will be adding further ranges of the next few weeks/months, so bookmark this page and keep coming back.
For those without a printer, you could get a friend to print them for you or contact me, for if there is enough feedback, I may find a way of making printed ones available commercially.
Free to download
Click on the chosen window and when the pdf loads on a new webpage, either print the page or download the file then print from that.
The Linka sets are A5 (half a A4 sheet), just print as normal to A4, then you can turn the print around (180 deg), re-insert in the printer and print a second (different or the same) set!
Try printing to paper first and get used to the orientation, then print to clear acetate but don’t forget to set your printer to its best quality!
Using a knife with a straight edge to cut out or scissors
I recommend Glue ‘n’ Glaze from Deluxe, but UHU or Bostik also works, to glue windows into the building.
Acetate sheets can be had for around £5 per 25 (works out at 10p per A5 sheet!)
BE warned! Acetate sheets can only be printed on one special side! Make sure it is the right way up in the printer!